Downloading the .app file to the switch – H3C Technologies H3C S7500E Series Switches User Manual
Page 4
3
NOTE:
You only need to upgrade the active MPU if the device has no standby MPU.
# Examine the free storage space on the active and standby MPUs.
•
On the active MPU
Directory of flash:/
0 -rw- 3597 Sep 01 2009 18:35:28 startup.cfg
1 -rw- 6625 Jun 02 2010 16:50:51 switch.cfg
2 -rw- 27475851 Aug 11 2010 11:04:20 switch001.app
3 -rw- 31782388 Jul 23 2010 09:25:21 switch002.app
64389 KB total (5636 KB free)
•
On the standby MPU
Directory of slot1#flash:/
0 -rw- 3597 Sep 01 2009 18:35:28 startup.cfg
1 -rw- 6625 Jun 02 2010 16:50:51 switch.cfg
2 -rw- 27475851 Aug 11 2010 11:04:20 switch001.app
3 -rw- 31782388 Jul 23 2010 09:25:21 switch002.app
64389 KB total (5636 KB free)
Verify that the free storage space is sufficient for the new .app file. You can delete undesired files
with the delete /unreserved command to free storage space.
# Delete undesired files from the active and standby MPUs.
•
On the active MPU
The content cannot be restored!!!
Delete flash:/switch001.app?[Y/N]:y
Deleting a file permanently will take a long time. Please wait...
%Delete file flash:/switch001.app...Done.
•
On the standby MPU
The content cannot be restored!!!
Delete slot1#flash:/switch001.app?[Y/N]:y
Deleting a file permanently will take a long time. Please wait...
%Delete file slot1#flash:/switch001.app...Done.
NOTE:
•
The delete /unreserved
file-url command deletes a file permanently and the action cannot be undone.
•
The delete
file-url command moves a file to the recycle bin and the file still occupies storage space. To
permanently delete the file from the recycle bin, execute the reset recycle-bin command in the original
directory of the file.
Downloading the .app file to the switch
Download the .app file to the storage medium (such as flash memory) of the active MPU and that of the
standby MPU. Skip this section if the file is already located there.