H3C Technologies H3C S7500E Series Switches User Manual
Page 24
23
4.
Run the terminal emulation program on the PC connected to the console port. Start the switch, enter
the boot menu (see
for more information), and type 1 when you see "Enter your
choice(0-5):" to enter the download protocol menu.
BOOT MENU
1. Download application file to device
2. Select application file to boot
3. Display all files in device
4. Delete file from device
5. Modify BootRom password
0. Reboot
Enter your choice(0-5):1
5.
In the download protocol menu, type 1 to set the TFTP parameters.
1. Set TFTP protocol parameter
2. Set FTP protocol parameter
3. Set XMODEM protocol parameter
0. Return to boot menu
Enter your choice(0-3): 1
Load File name :newest.app The name of the target .app file
Switch IP address :10.10.10.2 The IP address of the switch
Server IP address :10.10.10.3 The IP address of the PC that stores the .app
file
NOTE:
The switch must be on the same network segment as the PC storing the upgrade files.
6.
Set the TFTP parameters and press Enter. The following information appears:
Are you sure to download file to flash? Yes or No (Y/N):Y
7.
Answer Y to the question. The switch starts to download the file. When the download is complete,
the following appears:
Loading........................................................................
...............................................................................
...............................................................................
.......................................................................done!
Free space: 37584896 bytes
Writing flash..................................................................
...............................................................................
..........................done!
The attribute of old.app is changed from main to none!
done!
1. Set TFTP protocol parameters
2. Set FTP protocol parameters
3. Set XMODEM protocol parameters
0. Return to boot menu