Using xmodem through the console port – H3C Technologies H3C S7500E Series Switches User Manual
Page 17
16
NOTE:
The switch must be on the same network segment as the PC storing the upgrade files.
5.
After you set the FTP parameters and press Enter, the switch starts to download the upgrade file.
When the file is successfully downloaded, the following information appears:
Loading...........done!
Will you Update Basic BootRom? (Y/N):
6.
Answer Y to the question. The following information appears:
Will you Update Basic BootRom? (Y/N):Y
Updating Basic BootRom..........done!
Updating extended BootRom? (Y/N):
7.
Answer Y to the question. The following information appears:
Updating extended BootRom? (Y/N):Y
Updating extended BootRom...........done!
BootRom update menu:
1. Set TFTP protocol parameters
2. Set FTP protocol parameters
3. Set XMODEM protocol parameters
4. Update through file in device
0. Return to boot menu
Enter your choice(0-4):
8.
Type 0 to return to the boot menu.
BOOT MENU
1: Download application file to device
2: Select application file to boot
3: Display all files in device
4: Delete file from device
5: Modify bootrom password
0: Reboot
Enter your choice(0-5):0
9.
Type 0 to reboot the switch.
NOTE:
The Boot ROM upgrade takes effect at the next startup.
Using Xmodem through the console port
1.
Connect the console port of the switch to the PC that stores the upgrade files.
2.
Run the terminal emulation program on the PC. Start the switch, enter the boot menu (see
for more information), and press Ctrl+U when you see "Enter your choice(0-5):" to enter the
Boot ROM update menu.
BootRom update menu:
1. Set TFTP protocol parameters
2. Set FTP protocol parameters