H3C Technologies H3C S7500E Series Switches User Manual
Page 26

25
...............................................................................
.......................................................................done!
Free space: 37584896 bytes
Writing flash..................................................................
...............................................................................
..........................done!
The attribute of old.app is changed from main to none!
done!
1. Set TFTP protocol parameters
2. Set FTP protocol parameters
3. Set XMODEM protocol parameters
0. Return to boot menu
Enter your choice(0-3):0
16.
Type 0 to return to the boot menu.
After the .app file is successfully downloaded, set the file as the main or backup system software
image. For more information, see
Setting new main and backup system software images
17.
Using Xmodem through the console port
18.
Connect the console port of the switch to the PC that stores the target .app file.
19.
Run the terminal emulation program on the PC. Start the switch, enter the boot menu (see
for more information), and type 1 when you see "Enter your choice(0-5):" to enter the
download protocol menu.
BOOT MENU
1. Download application file to device
2. Select application file to boot
3. Display all files in device
4. Delete file from device
5. Modify BootRom password
0. Reboot
Enter your choice(0-5):1
20.
In the download protocol menu, type 3. The switch asks you to provide the name of the file you
want to download.
1. Set TFTP protocol parameters
2. Set FTP protocol parameters
3. Set XMODEM protocol parameters
0. Return to boot menu
Enter your choice(0-3): 3
Load File name :update.app The name of the file to be downloaded
21.
Type the file name and the download baud rate menu appears.
Please select your download baudrate:
1.*9600
2. 19200