1 acl configuration, Acl overview, Introduction to acl – H3C Technologies H3C S7500E Series Switches User Manual
Page 11: Acl configuration
1-1
1
ACL Configuration
This chapter includes these sections:
z
z
z
z
z
z
z
Configuring an Ethernet Frame Header ACL
z
z
Displaying and Maintaining ACLs
z
z
Unless otherwise stated, ACLs refer to both IPv4 and IPv6 ACLs throughout this document.
z
The S7500E Series Ethernet Switches are distributed devices supporting Intelligent Resilient
Framework (IRF). Two S7500E series can be connected together to form a distributed IRF device.
If an S7500E series is not in any IRF, it operates as a distributed device; if the S7500E series is in
an IRF, it operates as a distributed IRF device. For introduction of IRF, see IRF Configuration
Guide.
ACL Overview
This section covers these topics:
z
z
Application of ACLs on the Switch
z
z
z
z
Implementing Time-Based ACL Rules
z
IPv4 Fragments Filtering with ACLs
Introduction to ACL
As network scale and network traffic are increasingly growing, network security and bandwidth
allocation become more and more critical to network management. Packet filtering can be used to