beautypg.com

H3C Technologies H3C S12500 Series Switches User Manual

Page 43

background image

35

{

Run the spanning tree feature between the IRF fabric and the intermediate device.

{

Enable the IRF fabric to change its bridge MAC address as soon as the master leaves.

{

Create an ARP MAD VLAN and assign the ports on the ARP MAD links to the VLAN.

{

If the intermediate device is in an IRF fabric, assign this fabric a different domain ID than the
ARP MAD-enabled fabric to avoid false detection of IRF split.

To configure ARP MAD:

Step Command

Remarks

1.

Enter system view.

system-view

N/A

2.

Assign a domain ID to the IRF
fabric.

irf domain domain-id

By default, the domain ID of an
IRF fabric is 0.

3.

Configure the IRF bridge

MAC address to change as
soon as the master leaves.

undo irf mac-address persistent

By default, the IRF fabric's
bridge MAC address is retained
permanently even after the

master leaves.

4.

Create a VLAN dedicated to

ARP MAD.

vlan vlan-id

The default VLAN on the device
is VLAN 1.

5.

Return to system view.

quit

N/A

6.

Enter Ethernet interface view
or interface range view.

Enter interface range view:

{

Method 1:
interface range { interface-type

interface-number [ to

interface-type
interface-number
] } &<1-5>

{

Method 2:
interface range name name

[ interface { interface-type

interface-number [ to

interface-type
interface-number
] } &<1-5> ]

Enter Ethernet interface view:

interface interface-type
interface-number

To assign a range of ports to the
ARP MAD VLAN, enter interface
range view.
To assign one port to the ARP
MAD VLAN, enter Ethernet

interface view.

7.

Assign the port or port range
to the ARP MAD VLAN.

Assign the port to the VLAN as an

access port:

port access vlan vlan-id

Assign the port to the VLAN as a

trunk port:

port trunk permit vlan vlan-id

Assign the port to the VLAN as a

hybrid port:

port hybrid vlan vlan-id { tagged |
untagged }

Choose one command
depending on the port type.
ARP MAD has no requirement
for the link type.
The default link type of a port is
access.

8.

Return to system view.

quit

N/A

9.

Enter VLAN interface view.

interface vlan-interface
interface-number

N/A