Ensemble Designs 6040 Tracking Audio Delay - Manual (Page 9)

MODULE CONFIGURATION AND CONTROL
The parameters for each Avenue module must be configured after installation. This can be
done remotely using one of the Avenue remote control options or locally using the module
front panel controls. Each module has a REMOTE/LOCAL switch on the front edge of
the circuit board that must first be set to the control mode you will be using.
The configuration parameter choices for the module will differ between Remote and Local
modes. In Remote mode, the choices are made through software and allow more selec-
tions. The 6040 Parameter Table shown on the next page summarizes and compares the
various configuration parameters that can be set remotely or locally and the
default/factory settings.
If you are not using a remote control option, the module parameters must be configured
locally from the front panel encoder and both front panel and internal switches on the
module. Parameters that have no local control will be set to a default value. The Local
switches and internal on-board switches are illustrated in the Front Panel Controls
and Indicators and Internal Jumpers, Switches and Indicators sections following
the 6040 Parameter Table.
Avenue module parameters can be configured and controlled remotely from one or both of
the remote control options, the Avenue Touch Screen or the Avenue PC Application. Once
the module parameters have been set remotely, the information is stored on the module
CPU. This allows the module be moved to a different cell in the frame at your discretion
without losing the stored information. Remote configuration will override whatever the
switch settings are on the front edge of the module.
For setting the parameters remotely using the Avenue PC option, refer to the Avenue PC
Remote Configuration section of this document.
For setting the parameters remotely using the Avenue Touch Screen option, refer to the
Avenue Touch Screen Remote Configuration section of this data pack following the Avenue
PC section.
Model 6040 Tracking Audio Delay
6040-9