Ensemble Designs 6040 Tracking Audio Delay - Manual (Page 16)

In the Track 1 menu shown below, set the following parameters:
• Frame # – set frame number (AveNet Number) containing the module you wish to
track. You may have from 1 to 1000 frames. The AveNet frame number is defined
in the frame list on the Avenue PC Main screen.
• Slot # – selects the slot number of the module you wish to track in the frame
chosen above.
In this menu, the following indicators are available:
• Trk 1 En – box displays one of two states when pressed:
• Gray (Tracking 1 is not enabled)
• Gray/Green (Tracking 1 is enabled)
• Status 1 – displays the current state of Tracking 1 as one of the following:
• Disabled (tracking is disabled)
• No Module (Tracking 1 is not communicating with the module selected to
track causing a tracking error)
• Connected (Tracking 1 is communicating with the module selected to track).
• Track 1 Delay – displays the amount of delay that is currently being added to the
signal path from the Track 1 module.
Model 6040 Tracking Audio Delay
6040-16