Ensemble Designs 6040 Tracking Audio Delay - Manual (Page 27)

The following indicator and error boxes are available in the Input menu:
• I/P AES – displays information about the input AES signal that is decoded from
the channel status information as one of the following:
• No audio (signal not present)
• Pro audio (Professional format, stream contains audio data)
• Pro non-audio (Professional format, stream contains non-audio data)
• Cons audio (Consumer format, stream contains audio data)
• Cons non-audio (Consumer format, stream contains non-audio data)
• Sampling Freq – displays the sampling frequency of the input signal pair from
one of the following values:
• 48 kHz
• 44.1 kHz
• 32 kHz
• Non-standard (sampling frequency is not any of the above frequencies)
• I/P Error – one of two colors will display to indicate the AES input status:
• Black (signal is present)
• Red (no valid input present)
• Emph – one of two colors will display to indicate the AES emphasis state:
• Black (no emphasis detected)
• Yellow (50/15 µS emphasis detected. If emphasis is detected, the 6040 will
set the emphasis bits on the AES outputs and apply de-emphasis on the
analog outputs.)
Model 6040 Tracking Audio Delay
6040-27