Ensemble Designs 6040 Tracking Audio Delay - Manual (Page 21)

In the Ref/Stat menu shown, set the following output parameters:
• Ref Mode – select from three of the following possible reference modes:
• Auto Sel (module will automatically select the reference from the following
sources, in this order: AES input reference signal if present with sample
rate of 48 kHz, external reference is signal is present with sample rate of 48
kHz, or internal, free run, reference)
• External (module will lock to the external reference unless the signal is
missing or is the wrong sample rate, in which case it will go to the internal
reference)
• Internal (module will use internal reference)
In the Ref/Stat menu shown, the following status indicator boxes are available:
• Ref Status – displays the current reference source the module is using from one of
the following four states:
• AES IN Ref (reference source is AES input)
• Ext. Ref (reference source is external reference input)
• Int. Ref (reference source is internal reference)
• I/P AES – displays information about the input AES signal that is decoded from
the channel status information as one of the following:
• No audio (signal not present)
• Pro audio (Professional format, stream contains audio data
• Pro non-audio (Professional format, stream contains non-audio data)
• Cons audio (Consumer format, stream contains audio data)
• Cons non-audio (Consumer format, stream contains non-audio data)
Model 6040 Tracking Audio Delay
6040-21