Ensemble Designs 6040 Tracking Audio Delay - Manual (Page 15)

Avenue PC Remote Configuration
The Avenue PC remote control menus for this module are illustrated and explained in this
section. Refer to the 6040 Parameter Table shown earlier for a summary of available
parameters that can be set remotely through the menus illustrated. For more information
on using Avenue PC, refer to the Avenue PC Control Application Software data pack that
came with the option.
6040 Avenue PC Menus
In the Delay menu shown below, set the following parameters:
• Bulk Delay – set the delay in pulldown to In to delay the signal path with the
bulk delay value or Out to not delay the signal path.
• Bulk Delay Adj – set the amount of bulk delay from 0 to 1000 mS with the slider
by clicking on the left and right arrows. Select the Default button to enable the
default value. The bulk delay value is given in the box to the right of the slider.
In this menu, the following indicators are available:
• Total Delay – displays the total delay offset in milliseconds in the signal path.
The total value includes bulk delay, Track 1, Track 2 and Track 3 delay values if
enabled.
• Track 1 Delay – displays the amount of delay that is currently being added to the
signal path from the Track 1 module.
• Track 2 Delay – displays the amount of delay that is currently being added to the
signal path from the Track 2 module.
• Track 3 Delay – displays the amount of delay that is currently being added to the
signal path from the Track 3 module.
• Track Error – will display a message indicating tracking errors present.
Model 6040 Tracking Audio Delay
6040-15