Ensemble Designs 6040 Tracking Audio Delay - Manual (Page 18)

In the Input menu shown, set the following input parameters:
• In Source – select from two possible input sources:
• Digital (AES input, two channels, are used as the input source)
• Analog (analog inputs are used as the input source)
• In Mode – select from the following modes:
• 2-Channel (analog reference levels for these two channels may be set
independently)
• Stereo (analog reference levels for these two channels track each other)
• Dig. Ref – select from one of three selections as follows:
• -20 dBFS (analog audio reference is set to -20 dBFS in the digital domain,
the most common standard)
• -18 dBFS (analog audio reference is set to -18 dBFS in the digital domain,
the new SMPTE and EBU standard)
• -16 dBFS (analog audio reference is set to -16 dBFS in the digital domain,
the CBC standard)
• A. 1 In Ref – set the analog audio input channel 1 reference level to between
• -10 dBu and +8 dBu with the slider arrows. The selected value will appear
in the box to the right of the slider. Click Default to enable the default value
of +4 dBu.
• A. 2 In Ref – set the analog audio input channel 2 reference level to between
• -10 dBu and +8 dBu with the slider arrows. The selected value will appear
in the box to the right of the slider. Click Default to enable the default value
of +4 dBu.
Model 6040 Tracking Audio Delay
6040-18