Ensemble Designs 5400 Dual Sync Generator and Test Signal Generator with HD Tri-Level Sync User Manual
Page 26
The Slate menu screen shown below allows you to define four different text overlays Use
the controls to set the following:
•
Slate Select – select Off or the number of the slate to be defined from Slate 1-–4
or select GPI High or GPI Low to indicate to the external GPI device what state
will trigger a GPI input. Four GPI inputs are available corresponding to the four
slates.
•
Top Line – clicking in this window will bring up an alphanumeric pad which
allows you to define the top line of the slate text.
•
Bot Line – clicking in this window will bring up an alphanumeric pad which
allows you to define the bottom line of the slate text.
•
Cyclops – adds a motion element to the video test signal which proves that the
signal reaching this destination is a true live signal and not a freeze frame from a
frame synchronizer that has lost its input. If an audio pop or beep has been
selected in the previous menu, it will synchronize with audio outputs (left is
channel 1, right is channel 2).
Model 5400 Dual Sync Gen/Test Signal Generator
5400-26