beautypg.com

Ensemble Designs 5400 Dual Sync Generator and Test Signal Generator with HD Tri-Level Sync User Manual

Page 15

background image

Avenue PC Remote Configuration

The Avenue PC remote control status menu for this module is illustrated and explained
below. Refer to the 5400 Parameter Table for a summary of available parameters that
can be set remotely through the menus illustrated. For more information on using Avenue
PC, refer to the Avenue PC Control Application Software data pack that came with the
option.

Parameter fields that are grayed out can indicate one of the following conditions:

An option is not installed.

The function is not active.

The module is locked.

The User Level set with Avenue PC is not accessible from the current User Level.

5400 Avenue PC Menus

The Primary menu screen shown below allows you to set the following parameters for the
Primary generator output:

Pri Source – select the Primary generator reference source from either Config
Re
f (as defined in the Config menu) or Internal.

Standard – select the desired line standard output from 525–60 Hz or 625–50 Hz.

Setup – sets setup to On or Off for 525–60 Hz line output signals.

The Sync Lock window shows what standard the module is locked to or No Lock.

5400-15

Model 5400 Dual Sync Gen/Test Signal Generator

This manual is related to the following products: