Ericsson LBI-39224 - Manual (Page 299)

LBI-39224
B-11
LOGGED
WARNING
MESSAGE
LOGGED
WARNING
DATA
CAUSE/
CORRECTIVE
ACTION
W20-136:
CONV CHAN -
CONFLICT Channel number in
conflict. A conventional channel definition
has been received from a remote
CEC/IMC that falls within the local
CEC/IMC conventional channel
range. Each CEC/IMC has a
unique conventional channel range
assignment of sixty-four (64)
channels or less. Corrective
Action: Verify each CEC/IMC has
a unique switch assignment
number (node ID) assigned via the
MOM Controller Board DIP
switches. StarGate conventional
operation will not function
correctly unless each CEC/IMC
switch assignment number is
unique.
W20-137:
CONV CHAN -
DEFINED Channel that has been
defined in lower byte.
Source CEC/IMC
switch assignment
number in upper byte. A conventional channel has been
defined on a remote CEC/IMC
Manager, and the definition has
been received by this CEC/IMC
Manager. This warning is for
information purposes only. It is
generated as part of normal
operation to provide a record of
remote conventional channel
configuration changes on this
CEC/IMC.
W20-138:
CONV CHAN -
DELETED Channel that has been
deleted in lower byte.
Source CEC/IMC
node ID in upper
byte. A remotely defined conventional
channel has been deleted at the
remote CEC/IMC Manager. This
warning is for informational
purposes only and is a result of
normal operation.
W21-142:
T1/E1 INTERFACE -
CONNECTION
MEMORY RESET Data field is the
T1/E1 Interface Card
affected (1-8). A Connection Memory Reset has
occurred at the CEC/IMC. The
Connection Memory stores input-
to-output routing maps and thus
controls the flow of audio and/or
data signals on the T1/E1 Interface
Card. A Connection Memory
Reset will cause the TEC to issue a
clock failure and be re-initialized
by the Controller Board.