Ericsson LBI-39224 - Manual (Page 204)

LBI-39224
3-174
( No ), or cancel the Close command ( Cancel ) and remain in the
DC Controlled Station State Table Mapping dialog box.
3.15 LOGGING RECORDER CONFIGURATION
The Logging Recorder Interface Module (LRIM) interface is used to
record audio for selected units, groups and conventional channels. The
CEC/IMC supports four (4) LRIM devices, each device supporting up
to 64 modules and 32 channels. Each module assigns a unit, group, or
conventional channel to a specific LRIM channel.
Logging Recorder configuration is performed from the
Logging Recorder Configuration dialog box. From the CEC/IMC
Manager menu bar select Configure System /
CEC/IMC Configuration / LRIM to display the
Logging Recorder Configuration dialog box, Figure 38.
Figure 38 Logging Recorder Configuration Dialog Box
Help
Choose the Help button to access the Help function. (Help is also
available by pressing the F1 key.)
The current Logging Recorder is displayed in the drop-down list box at
the top center of the
Logging Recorder Configuration dialog box.
Select the desired Logging Recorder to view or configure from this list
box (LRIM 1 - 4).
The Module List list box contains all of the programmable
(configurable) modules for the selected Logging Recorder. The module
number, entity alias, channel number, and output level (volume) are