Ericsson LBI-39224 - Manual (Page 19)

LBI-39224
1-3
and EDACS Data Gateway (EDG) interface. In release 5.0
CEC/IMC Manager TDM bus time slots are allocated from
each site, console, or DVIM interface audio configuration
dialog box.
System Options
– Auxiliary I/O – Program auxiliary I/O events.
– Multisite Unit Logout – Configure multisite unit logout
parameters for each unit, both timer-based and instant
command logouts are provided View unit and group location
information.
– Confirmed Call – Configure confirmed call options, exempt
sites from confirmation process and enable automatic
confirmed call database repair.
– ProSound – Configure ProSound™ site adjacency
information for each site. This information is used during
wide area scan operations.
– File Transfer – Transfer unit, group, and site databases from
the System Manager to the CEC/IMC Manager. Distribute
System Manager database information stored at the CEC/IMC
Manager to CEC/IMC interface modules.
– Distributed Multisite/StarGate Networks – Configure
Network Interface Module (NIM) and StarGate network
options such as NIM baud rates, NIM audio channel
parameters, and conventional channel settings.
– Time and Date – Set system time and date source. This can be
broadcast throughout the entire CEC/IMC for time
synchronization. Also configure the NETCLOCK/2 interface
(optional).
– Digital Console Pre-empt – Digital console pre-empt allows
for console pre-empting of digital calls. (This feature may
require Site Controller or GETC™ interface and radio
software changes.)
– Telephone Interconnect – The modifications allow "Caller
ID" on inbound interconnect calls, and Multiple Jessica
options on StarGate systems.