Ericsson LBI-39224 - Manual (Page 242)

LBI-39224
4-4
4.2.2 Board Identification
Selecting (single-click) any of the nodes will display the
Board Identification dialog box shown below. The information in the
upper half of this dialog box—Node ID, Type, Version, Assignment,
and Error(s)—is a "snapshot" of the node when selected, it does not
update to reflect any changes that may occur while viewing this dialog
box.
Figure 46 Board Identification Dialog Box
Help
Choose the Help button to access the Help function. (Help can also be
accessed by pressing the F1 key.)
Close
Choose the Close button to exit the Board Identification dialog box
and return to the CEC/IMC Diagnostics (Node Data) screen.
Send
Choose the Send button to cause the ID LEDs of those boards selected
in the
Board Identification dialog box to begin flashing at the
CEC/IMC.
Current Node Data
The upper half of the Board Identification dialog box contains the
information listed below about the selected interface module (device).