Allmand Brothers MB 6200 - Manual (Page 25)

25
Hand-Held Terminal Features
Two features of the hand-held terminal used by the SBC program are:
•
Sleep mode
•
Backlight
Sleep Mode
To reduce battery power consumption, the hand-held terminal is automatically put into the sleep mode after
120 seconds of inactivity. To reactivate the terminal, press any key.
Backlight
After 90 seconds of inactivity, the backlight is automatically turned OFF. To turn the backlight ON, press
any key.
HHT Screen Navigation
HHT screen navigation is accomplished by pressing keys on the keypad. The following keys have the same
meaning in all screens:
Key Action
↑ ↑ Scroll up or increment a number by one.
↓ ↓ Scroll down or decrement a number by one.
B
Go back one screen.
ENTER Dual purpose:
Chapter 1 If entering numbers, this key means accept the keys
pressed, validating the entry.
Chapter 2 From other menus, this key means execute the current
selection.
Numbered Screens requiring numbered entries will accept the entry as a single
key press or as SHIFT, then the key press. Example: If you press H
or SHIFT+1, both are understood as 1.
Red Characters Except for screens requiring number entries, you access the red
characters on the keys by first pressing SHIFT, followed by a key
with both red and black characters.
Power Up
When you power up the hand-held terminal, the following messages appear:
•
Start Up
•
Copyright
•
Password