Airmar WeatherCaster™ Software - Manual (Page 49)

49
If you click Restore, the Confirm Restore window will appear (see Figure 62).
NMEA 2000® Settings
You can alter the NMEA 2000 settings. In the Advanced Setup window on the
Sensor Hardware tab, click NMEA 2000 Settings to begin (see Figure 29). The
Sensor NMEA 2000 Settings window will appear (see Figure 63).
• Address Claim Parameters lets you set the device instance used in the
address claim name when transmitting the address claim PGN.
• Configuration Information allows you to set modifiable parameters in the
Configuration Information PGN.
Figure 62. Confirm Restore window
Figure 63. NMEA 2000 Settings window