Airmar WeatherCaster™ Software - Manual (Page 36)

36
NOTE: One sensor may report multiple functions. For example, a DST200 may
give water depth, water speed, and water temperature data. However, this Source
Sensor will be identified in the drop-down menu by only one of its functions (see
Figure 36).
In the Enable/Disable Functionality window, you can modify the PGN settings of
any or all of the selected sensors at the same time (see Figure 37) As the interval
changes, the Hz transmission rate will also change.
Figure 36. Advanced Setup window—Source Sensor DST200 identified
PASS
by its Water Speed function only.
Figure 37. Enable/Disable Functionality window