Airmar WeatherCaster™ Software - Manual (Page 23)

23
Using WeatherCaster™ Software
The WeatherCaster software has three display screens. To move between
screens, click the Next or the Previous arrow in the top right corner of the screen.
• Setup Screen—This screen contains gauges with dials along the left side. The
dials have settings that can be changed by the user (see Figure 24).
• Analog Gauge Screen—This screen displays the data being sent from the
sensor(s) on gauges in both analog and digital formats (see Figure 25).
• Large Compass and Digital Readout Screen—This screen displays a large
compass on the left and data being sent from the sensor(s) in digital format on
the right (see Figure 26 on page 29).
WARNING
Navigation Aid Only—The WeatherCaster™ software is a
means to display weather and navigation data. It is an aid to
navigation only and should never be solely relied upon. It is
not a replacement for traditional navigation aids and
techniques. Only official government charts contain all the
information needed for safe navigation. As always, the end-
user is responsible for their prudent use.