Extron Electronics Extender Series - Manual (Page 33)

Extender Series • Reference
PRELIMINAR
Y
A-3
Sync
Input type ....................................... RGBHV, RGBS, RGsB, RsGsBs, bi-level
and tri-level component video sync
Output type .................................... RGBHV, RGBS, RGsB, RsGsBs, bi-level
and tri-level component video sync
Input level ...................................... 2.0 V to 5.0 Vp-p
Output level ................................... TTL: 5 Vp-p, unterminated
Input impedance ........................... 510 ohms
Output impedance ........................ 75 ohms
Max. propagation delay ............... 18.8 ns
Max. rise/fall time ........................ 4 ns
Polarity............................................ Positive or negative (follows input)
Audio
Gain ................................................. Unbalanced output: 0 dB;
balanced output: +6 dB
Frequency response ...................... 20 Hz to 20 kHz, ±0.5 dB
THD + Noise .................................. 0.025% @ 1 kHz, 0.020% @ 20 kHz at
nominal level
S/N .................................................. >90 dB at rated maximum output
Stereo channel separation ............ >75 dB @ 20 Hz to 20 kHz
Audio input
Number/signal type ..................... 1 stereo, unbalanced
Connectors ..................................... (1) 3.5 mm mini stereo jack
Impedance ...................................... >10k ohms unbalanced, DC coupled
Nominal level ................................ -10 dBV (316 mVrms)
Maximum level .............................. +6 dBV, (unbalanced) at 1% THD+N
Audio output
Number/signal type ..................... 1 stereo, balanced/unbalanced
Connectors
Extender WM, Extender WM AUS, Extender WM AAP, Extender D
(1) 3.5 mm direct insertion captive screw
connector, 5 pole
Extender AAP, Extender AAP EX, Extender MK,
Extender AKM UK AAP, Extender WM AUS, Extender AKM MAAP
(1) 3.5 mm captive screw connector, 5 pole
Impedance ...................................... 50 ohms unbalanced, 100 ohms balanced