Airaid 1019 - Manual (Page 2)

Instructions Revision
10.10.14
6. Reinstall the airbox onto the top of the engine and reconnect
the fresh air tube. Reinstall the factory bolts and tighten the
hose clamps. Reinstall the beauty cover.
7. Double check your work. Make sure there is no foreign
material in the intake tract. Make sure all clamps, connectors,
hoses, nuts, and bolts are secure.
Reconnect the negative battery cable.
ECONOAID 2688 E Rose Garden Ln. Phoenix, AZ 85050 (888) 876-4676 www.ECONOAID.com
5. Reinstall the factory bolts and tighten the bolts in a cross
pattern to the manufacturer’s specifications. Before starting
the engine, open and close the throttlebody to make sure there
are no obstructions.
ECONOAID
1.
2.
3.
4.
4. Install the ECONOAID Throttlebody Booster against the
intake manifold with the logo facing the throttlebody. Next
install the supplied gasket between the ECONOAID and the
throttlebody. 3. Remove the four bolts that hold the throttlebody to the in-
take manifold.
Fiber Gasket