Airaid 1017 - Manual

Parts List
#1 ECONOAID x1
#2 Gasket x2
1. Disconnect the negative battery cable!
A.) Loosen the hose clamp that secures the fresh air tube to
the air cleaner box. Loosen the hose clamp that secures the air
cleaner box to the throttlebody. B.) Remove the two bolts that
secure the air cleaner box to the engine. C.) Squeeze the tab
and disconnect the Mass Air Flow sensor wiring harness from
the air cleaner box. Lift the air cleaner box off of the throttle-
body and set aside. 2. A.) Disconnect the two rubber hoses from the throttlebody.
B.) Remove the two nuts and one bolt that secure the throttle-
body to the intake manifold.
Thank you for purchasing the ECONOAID Throttlebody Booster. Please read the instruction manual carefully before pro-
ceeding with the installation. Contact ECONOAID @ (888) 876-4676 8:00 AM - 5:00 PM MST Weekdays for questions regarding fit
or instructions that are not clear to you. Your ECONOAID Throttlebody Booster was carefully inspected and packaged. Check that
no parts are missing, or were damaged during shipping. If any parts are missing, please contact ECONOAID.
Tools Required For Installation
10mm, 12mm Sockets
Ratchet and Extension
Part Number 1017
2001-09 Toyota Prius
1.5L Engine
A
A
B
A
B
C
B
B
U.S. Pat. #7,665,442