Airaid 1014 - Manual (Page 2)

Instructions Revision
12.09.14
6. Reinstall the air intake tube and reconnect the hoses and elec-
trical connectors. Tighten all hose clamps. Reinstall the beauty
cover.
7. Double check your work. Make sure there is no foreign
material in the intake tract. Make sure all clamps, hoses, con-
nectors, nuts, and bolts are secure.
Reconnect the negative battery cable.
ECONOAID 2688 E Rose Garden Ln. Phoenix, AZ 85050 (888) 876-4676 www.ECONOAID.com
5. Reinstall the factory bolts and tighten them in a cross pattern
to the manufacturer’s specifications. Before starting the engine,
open and close the throttlebody to make sure there are no ob-
structions.
ECONOAID
1.
2.
3.
4.
4. Install the ECONOAID Throttlebody Booster against the
intake manifold with the logo facing the throttlebody. Next
install the supplied gasket between the ECONOAID and the
throttlebody. 3. Remove the four bolts that hold the throttlebody to the in-
take manifold.
Fiber Gasket