Airaid 1002 User Manual
Page 2
Instructions Revision
11/11/10
ECONOAID 2688 E Rose Garden Ln. Phoenix, AZ 85050 (888) 876-4676 www.ECONOAID.com
5. Reinstall the intake tube and beauty cover. Double check
your work! Make sure all nuts, bolts, hoses, clamps, and con-
nectors are tight.
Re connect the negative battery cable!
4. Before starting the engine, open the throttlebody to make
sure that there are no obstructions.
3. Pull the throttlebody away from the intake manifold, install
the ECONOAID Throttlebody Booster against the intake
manifold in between the two supplied gaskets with the logo
facing the throttlebody. Reinstall the throttlebody onto the
intake manifold using the factory hardware.
ECONOAID
Rear Gasket
Front Gasket
Included with your ECONOAID Throttlebody Booster is a
decal with the California Air Resources Board ( C.A.R.B. )
Executive Order number D-520-4. This decal must be placed
in plain view inside the engine compartment. Failure to do
may prevent you from passing a smog inspection.
- 883-283 (7 pages)
- 200-585-1 (2 pages)
- 200-583 (2 pages)
- 300-561 (2 pages)
- 400-531 (2 pages)
- 200-512-1 (2 pages)
- 200-555 (2 pages)
- 200-543 (2 pages)
- 200-557 (2 pages)
- 200-580 (2 pages)
- 200-584 (2 pages)
- 200-586 (2 pages)
- 200-589 (2 pages)
- 200-617 (2 pages)
- 200-612-P (2 pages)
- 200-615 (2 pages)
- 200-630-1 (2 pages)
- 250-634 (2 pages)
- 300-560 (2 pages)
- 300-562 (2 pages)
- 300-564-P (2 pages)
- 300-563 (2 pages)
- 300-565 (2 pages)
- 300-567 (2 pages)
- 300-568 (2 pages)
- 300-570 (2 pages)
- 300-573 (2 pages)
- 300-574 (2 pages)
- 300-575 (2 pages)
- 300-577 (2 pages)
- 300-626 (2 pages)
- 300-631-1 (2 pages)
- 310-506 (2 pages)
- 300-637 (2 pages)
- 310-508 (2 pages)
- 310-509 (2 pages)
- 310-510 (2 pages)
- 310-515 (2 pages)
- 310-511 (2 pages)
- 310-616 (2 pages)
- 310-618 (2 pages)
- 350-532 (2 pages)
- 350-635 (2 pages)
- 400-516 (2 pages)
- 400-507 (2 pages)