Filter identification – Airaid 100-256 User Manual
Page 2
10. Install the Airaid premium onto the Filter adapter
and tighten the clamp..
14. Connect the performance airbox assembly to
your throttle body or carburetor by using any combi-
nation of Airaid’s UBI components.
PN
100-300
3.0” UBI Tube Only
PN
100-350
3.5” UBI Tube Only
PN
100-400
4.0” UBI Tube Only
Go to www.airaid.com for a complete list of compo-
nents for a custom install.
8. Attach the L bracket to the Air Dam using one 1/4-
20 Button Head Bolt, Two 1/4” Flat Washers, and one
of the 1/4-20 Nylock Nuts (#11).
7. Align the Aid Dam tab with the factory bolt hole from
step #3 and secure it by reusing the factory bolt.
9. The third mounting point will need to be drilled into
the inner fender. Secure the Air Dam tab using one 1/4-
20 Button Head Bolt, one 1/4” Flat Washer topside, and
the Fender Washer (#10) and the last 1/4-20 Nylock nut
from below.
UBI intake kits consist of multiple angles and straights,
which you cut as desired. Thousands of intake varia-
tions are possible! Available separately, as tubes only,
or individual components including ; couplers,
clamps, brackets and hardware.
Airaid Filter Co. 2688 E Rose Garden Ln. Phoenix AZ 85050 (800) 498-6951
P/N 790-551 Aerosol Spray
P/N 790-550 Squeeze Spray
REV.02.27.14
For your Oiled media filter we
suggest using the AIRAID Filter
Tune-Up Kit!
Synthamax Air Filters do not require oil.
Service air filter as needed by cleaning
with common non-petroleum all-purpose
household cleaner and water. Simple
Green®, Formula 409® or equivalent
works great. Apply cleaner to outside of
air filter and allow to soak. Then flush
filter clean from the inside out with a gar-
den hose and repeat steps if necessary.
Do not apply high pressure water or air
to clean filter. Allow filter to air dry and
reinstall
.
Thank you for purchasing the Airaid UBI System. Contact Airaid @ (800) 498-6951 8:00 AM - 5:00 PM MST weekdays for questions re-
garding fit or instructions that are not clear to you. Your Airaid UBI System was carefully inspected and packaged. Check that no parts are miss-
ing, or were damaged during shipping. If any parts are missing, contact Airaid. The air filter element is protected from direct exposure to water and
debris; care should be taken not to drive through deep water. WATER INGESTION IS THE DRIVERS RESPONSIBILITY! The air filter is reusa-
ble and should be cleaned periodically.
FILTER IDENTIFICATION
700-497 Airaid Oiled Media 701-497 Airaid SynthaMax Dry Media - Red
702-497 Airaid SynthaMax Dry Media - Black 703-497 Airaid SynthaMax Dry Media - Blue