Airaid 511-781 - Manual (Page 2)

10. A) Install the 1/2”x 13” breather hose
(#5) from the MIT to the valve cover.
B) Install the 1/4” x 1/4” x 1/8” vacuum tee
(#12) into the 1/4” x 4” hose (#9) and then to
the factory 1/4” and 1/8” vacuum lines, as
shown. 11. Reinstall the beauty cover removed in
step #1.
12. Double check your work!
Make sure there is no foreign material in the intake path. Make sure all clamps, hoses, bolts,
nuts, and screws are tight.
13. Reconnect the negative battery cable!
Airaid Filter Co. 2688 E Rose Garden Ln. Phoenix AZ 85050 (800) 498-6951 [email protected] www.airaid.com
Before! After!
Instructions Revision
Date: 11/16/10
Synthamax Air Filters do not require oil. Service air filter as needed by cleaning with common non-petroleum all-purpose household
cleaner and water. Simple Green®, Formula 409® or equivalent works great. Apply cleaner to outside of air filter and allow to soak.
Then flush filter clean from the inside out with a garden hose and repeat steps if necessary. Do not apply high pressure water or air to
clean filter. Allow filter to air dry and reinstall
.
B.
A.