Airaid 510-781 - Manual (Page 2)

10. A) Install the 1/2”x 13” breather hose
(#5) from the MIT to the valve cover.
B) Install the 1/4” x 1/4” x 1/8” vacuum tee
(#12) into the 1/4” x 4” hose (#9) and then to
the factory 1/4” and 1/8” vacuum lines, as
shown. 11. Reinstall the beauty cover removed in
step #1.
12. Double check your work!
Make sure there is no foreign material in the intake path. Make sure all clamps, hoses, bolts,
nuts, and screws are tight.
13. Reconnect the negative battery cable!
Airaid Filter Co. 2688 E Rose Garden Ln. Phoenix AZ 85050 (800) 498-6951 [email protected] www.airaid.com
Before! After!
Instructions Revision
Date: 06/22/07
Don’t Forget Your AIRAID Filter Tune-Up Kit!
P/N 790-551 Aerosol Spray
P/N 790-550 Squeeze Spray
B.
A.