Airaid 400-799 - Manual

2. A. Disconnect the two breather lines in the factory
intake tube .
B. Loosen the two intake clamps, and remove the facto-
ry intake tube. 3. If installing the Airaid Jr. Kit, unfasten the three clips
on the left side of the factory airbox, and remove the up-
per half of the factory airbox. Remove the factory air fil-
ter element.
4. Install The Airaid Premium Filter (#1) into the air-
box. 5. Reinstall the airbox upper half. 6. A.) Install the 3/8 “ Barbed Fitting (#5) into the thread-
ed holt in the Intake Tube.
B.) Insert the 5/8” Grommet (#7) into the Intake tube as
shown. Complete the tube assembly by inserting the 5/8
PCV Fitting (#6) into the Grommet.
8. Install the Silicone Reducer (#4) and Hose clamps
onto the Airaid Intake Tube. Place the #56 Clamp (#18)
on the throttle body side of the Reducer, and the #64
Clamp (#9) on to the Tube side. 7. Install the hump hose (#3) and two #60 hose clamps
(#9) onto the Intake Tube as shown. Leave the hose
Clamps loose for now. 9. Install the Intake Tube onto the throttle body first, then
into the airbox. Tighten all of the Hose Clamps.
Installation Instructions
For Part Numbers:
400-799
860-397 Airaid Oiled Media Filter
401-799 861-397 SynthaMax Dry Media Filter - Red
402-799 862-397 SynthaMax Dry Media Filter - Black
403-799 863-397 SynthaMax Dry Media Filter - Blue
400-999 Airaid M.I.T. Tube
2011-14 Ford F-150
5.0L V8
A.
B.
1. Disconnect The Negative Battery Terminal!
Full color instructions can be viewed on our web site at Airaid.com. Use the Product Search function to find your part number, and click View Details.
Component Identification
1. Airaid Premium Filter * 1
2. Airaid Intake Tube 1
3. Hump Hose 1
4. Silicone Coupler 1
5. 1/4NPT to 3/8"Hose Fitting 1
6. PCV FITTING 1
7. GROMMET 1
8. #56 Hose Clamp 1
9. #60 Hose Clamp 2
10. #64 Hose Clamp 1
* Filter included in Airaid Jr. kit only