Airaid 861-341 User Manual
Page 2
4. Insert the Airaid Premium Filter into
the factory housing. The filter must be
fully inserted into the bottom of the
housing. Install the factory filter
housing with the Airaid Premium Filter
into the vehicle in the reverse order.
Double check your work to insure that
all connections are tight there are no
foreign objects in the intake system.
3. Remove the element from the filter
housing and discard the element.
Remove all remaining glue from the
inside surface of the housing and clean
surface using a rag.
Synthamax Air Filters do not require oil. Service air filter as needed by cleaning
with common non-petroleum all-purpose household cleaner and water. Simple
Green®, Formula 409® or equivalent works great. Apply cleaner to outside of air
filter and allow to soak. Then flush filter clean from the inside out with a garden
hose and repeat steps if necessary. Do not apply high pressure water or air to clean
filter. Allow filter to air dry and reinstall.
Airaid Filter Co. 2688 E Rose Garden Ln. Phoenix AZ 85050 (800) 498-6951
www.airaid.com