Don’t forget your airaid filter tune-up kit – Airaid 860-161 User Manual
Page 2
5. Locate the raised rectangle in the bottom of the
factory airbox. It is important to engage the notch at
the bottom of the Airaid Premium Filter to ensure
proper fit and a good seal.
6. Carefully align the notch on the Airaid Premium
Filter with the raised rectangle at the bottom of the
factory airbox, then slide the air filter towards the
elbow. Make sure the air filter is seated inside the
factory housing securely. Next, replace the factory
inspection cover, and tighten the screw.
Instructions Revision
12/28/09
Contact your nearest Airaid dealer for an Airaid Intake System for your car, truck or SUV.
3. Slide the factory air filter away from the elbow of
the airbox and remove it.
2009-10 Models: Be sure to remove the separate
sealing ring with the filter.
4. Locate the word “Down” on the filter, and notice
that there is a notch in the urethane below it. It is
important to locate this notch in the correct location
in the bottom of the factory airbox.
Don’t Forget Your AIRAID Filter Tune-Up Kit!
P/N 790-551 Aerosol Spray
P/N 790-550 Squeeze Spray
Sealing Ring