Airaid 540-539-P - Manual (Page 2)

2
Installation Instructions. Read Me!
1. DISCONNECT NEGATIVE(-) BATTERY CABLE.
2. Remove air intake hose assembly.
3. Remove throttle cable bracket and save bolts. (Ref. “B”)
4. Remove (2) bolts from the throttle body. (Ref. “A”)
5. Install (2) extension plates for throttle cable bracket using (2) 6mm flat head screws. (Ref. “B”)
6. Install power plate using (2) furnished gaskets, (2) 8mm x 80mm bolts, and (2) 8mm washers. (Ref. “A”)
7. Reinstall throttle cable bracket using saved bolts. (Step 3)
8. Inspect & Test throttle linkage for full Open & Closed travel before driving. Cables may require adjustment. Please refer to
service manual for proper adjustment.
9. Reinstall air intake hose assembly. (Step 2)
10. Replace 3/8 vacuum hose with furnished 3/8 I.D. x 4 1/4 O.A.L. vacuum hose (Ref. “C”)
11. Reconnect battery cable. Enjoy!
The sound of power...The “whistle” means its working!
Ref. “B”- (2) 3/4 Extension Plates
(2) 6mm x 16mm
Flat Head Screws
Ref. “A”- (1) Power Plate
(2) Gaskets
(2) 8mm x 80mm Bolts
(2) 8mm Flat Washers
Ref. “C”- (1) Vacuum Hose
3/8 I.D. x 4 1/4 O.A.L.
AIRAID Filter Co. 2688 E Rose Garden Ln. Phoenix AZ 85050 (800) 498-6951 [email protected] www.airaid.com
Rev. 02/21/07