Airaid 510-628 User Manual

Airaid Accessories for air

Parts List

#1 Poweraid Spacer

x 1

#2 6mm x 60mm Bolt

x 4

#3 6mm Flat Washer

x 4

#4 Fiber Gasket

x 1

Tools Required For Installation

5/16”, 10mm Socket

Ratchet and Extension

Installation Instructions
Part Number 510-628
Poweraid Spacer For
2010-2014 Toyota FJ Cruiser
2010-2015 Toyota 4Runner
4.0L V-6

Thank you for purchasing the Poweraid Throttle Body Spacer. Please read the instruction manual carefully before proceed-

ing with the installation. Contact AIRAID @ (800) 498-6951 8:00 AM - 5:00 PM MST Weekdays for questions regarding fit or instruc-
tions that are not clear to you. Your Poweraid Throttle Body Spacer was carefully inspected and packaged. Check that no parts are
missing, or were damaged during shipping. If any parts are missing, please contact AIRAID.

Disconnect The Negative Battery Terminal.

1. Remove the engine cover.
Lift up on the front of the engine cover to unseat the
mounting grommets and remove it from the vehicle.

2. Remove the factory intake.
A.) Pry the wire harness anchor from the intake resona-
tor chamber
B.) Remove the 6mm anchor bolt from the resonator.
C.) Disconnect the crankcase breather and fuel pressure
regulator lines.
D.) Loosen the clamps on both ends of the intake tube