Airaid 510-537 - Manual (Page 2)

2
Installation Instructions. Read Me!
1. DISCONNECT NEGATIVE (-) BATTERY CABLE.
2. Remove air intake hose assembly.
3. Remove throttle body cover and save nuts.
4. Remove throttle body bolts, nuts, and studs.
5. Remove throttle body and install power plate using (3) “O” Rings, (4) 8mm x 100mm hex bolts, and
(4) 8mm flat washers. (Ref. “A”, “B”)
6. Inspect & Test throttle linkage for full Open & Closed travel before driving. Some cruise or kickdown cables may require adjustment.
Please refer to your vehicles service manual for proper adjustment.
7. Reinstall throttle body cover using saved nuts and air intake hose. (Ref. to Steps 2 & 3)
8. Reconnect negative battery cable. Enjoy!
The sound of power...The “whistle” means its working!
Rev. 07/12/06
Ref. “A”- (1) Power Plate
(3) “O”-Rings
Ref. “B”- (4) 8mm x 100mm Hex Bolts
(4) 8mm Flat Washers
AIRAID Filter Co. 2688 E Rose Garden Ln. Phoenix AZ 85050 (800) 498-6951 [email protected] www.airaid.com