Airaid 400-623 User Manual
Page 2
Instructions Revision
02/04/09
Contact your nearest Airaid dealer for an Airaid Intake
System for your car, truck or SUV.
The sound of power...The “whistle” means its working!
Reconnect the negative battery cable!
2. Install the larger diameter end of the Poweraid Spacer into the aluminum
intercooler tube as shown. Next reinstall the coupler over the spacer, and onto
the intercooler tube in the factory position. Slide the hose clamp back up the
tube and reposition it in the original position over the coupler and tighten to the
manufacturer’s specifications.
Intercooler Tube
Poweraid Spacer
Included with your Poweraid Spacer is a sticker with a California Air Resources Board
(C.A.R.B.) Executive Order (EO) number. This sticker must be placed in plain view inside of
the engine compartment. Failure to do so may prevent you from passing a smog inspection.
- 883-283 (7 pages)
- 200-585-1 (2 pages)
- 200-583 (2 pages)
- 300-561 (2 pages)
- 400-531 (2 pages)
- 200-512-1 (2 pages)
- 200-555 (2 pages)
- 200-543 (2 pages)
- 200-557 (2 pages)
- 200-580 (2 pages)
- 200-584 (2 pages)
- 200-586 (2 pages)
- 200-589 (2 pages)
- 200-617 (2 pages)
- 200-612-P (2 pages)
- 200-615 (2 pages)
- 200-630-1 (2 pages)
- 250-634 (2 pages)
- 300-560 (2 pages)
- 300-562 (2 pages)
- 300-564-P (2 pages)
- 300-563 (2 pages)
- 300-565 (2 pages)
- 300-567 (2 pages)
- 300-568 (2 pages)
- 300-570 (2 pages)
- 300-573 (2 pages)
- 300-574 (2 pages)
- 300-575 (2 pages)
- 300-577 (2 pages)
- 300-626 (2 pages)
- 300-631-1 (2 pages)
- 310-506 (2 pages)
- 300-637 (2 pages)
- 310-508 (2 pages)
- 310-509 (2 pages)
- 310-510 (2 pages)
- 310-515 (2 pages)
- 310-511 (2 pages)
- 310-616 (2 pages)
- 310-618 (2 pages)
- 350-532 (2 pages)
- 350-635 (2 pages)
- 400-516 (2 pages)
- 400-507 (2 pages)