Airaid 400-597 - Manual (Page 2)

2
Installation Instructions. Read Me!
1. DISCONNECT NEGATIVE (-) BATTERY CABLE.
2. Remove air intake hose assembly.
3. Remove throttle body intake cover.
4. Remove (4) bolts from the throttle body.
5. Remove bolts from the throttle linkage bracket and save.
6. Install power plate, (2) gaskets, (4) 6mm x 60mm bolts, and (4) lock washers. (Ref. “A”, “D”)
7. Locate (2) 3/4” linkage plates and (2) Flat Head Screws before installing the throttle linkage bracket using
saved bolts. (Ref. “C”)
8. Inspect & Test the throttle linkage for full Open & Closed travel before driving. Some cruise or kickdown ca-
bles may require adjustment. Please refer to your vehicles service manual for proper adjustment.
9. Reinstall throttle body intake cover and air intake hose assembly.
10. Reconnect battery cable. Enjoy!
The sound of power...The “whistle” means its working!
Rev. 07/12/06
Ref. “A”- (1) Power Plate
(2) Gaskets
Ref. “C”- (2) 3/4” Linkage Plates
(2) 6mm x 12mm Flat Head Screws
Ref. “D”- (4) 6mm x 60mm Bolts
Ref. “B”- Throttle Body
AIRAID Filter Co. 2688 E Rose Garden Ln. Phoenix AZ 85050 (800) 498-6951 [email protected] www.airaid.com