Airaid 310-506 - Manual (Page 2)

2
Installation Instructions. Read Me!
1. DISCONNECT NEGATIVE (-) BATTERY CABLE.
2. Remove air intake hose assembly.
3. Remove throttle body air intake box.
4. Remove (3) bolts from the throttle body and save.
5. Unclip throttle & cruise cables. Remove from manifold and throttle lever.
6. Install furnished throttle & cruise cable bracket and tighten bolts. (Ref. “B”)
7. Install both throttle & cruise cables thru reinforcement ring of throttle cable bracket. Slide and lock both plas-
tic cable retainers into slot separately.
8. Install “O” ring into groove of power plate.
9. Install power plate using (3) saved bolts. (Ref. “A” and Step 4)
10. Reattach cruise and throttle cables to throttle body lever.
11. Remove (2) torque screws and reinstall with (2) 1/4” thick spacers. (Ref. “C”)
12. Inspect & Test throttle linkage for full Open & Closed travel before driving. Some cruise and kick down ca-
bles may require adjustment. Please refer to your vehicles service manual for proper adjustment.
13. Reinstall throttle body air intake assembly using (Step 3) as an example.
14. Reconnect battery cable. Enjoy!
The sound of power...The “whistle” means its working!
ASSEMBLY DETAIL (Ref. “B”)
Ref. “B”- (1) Throttle Cable Bracket
(2) 3/8 I.D x3/4 O.D. x .136 O.A.L. Spacers
(1) Nutplate with 3/8-16” threads
(2) 3/8-16” x 1” Hex Head Bolts
Ref. “A”- (1) Power Plate
(1) O-ring #238
(3) Saved Bolts
Ref. “C”- (2) 1/4x3/4x1/4 Spacers
Bracket
Nutplate
(2) Spacers
Rev. 07/12/06
AIRAID Filter Co. 2688 E Rose Garden Ln. Phoenix AZ 85050 (800) 498-6951 [email protected] www.airaid.com