Airaid 300-570 - Manual (Page 2)

2
Installation Instructions. Read Me!
1. DISCONNECT NEGATIVE (-) BATTERY CABLE.
2. Remove air cleaner assembly.
3. Using 1/2” socket, remove (4) 5/16” bolts attaching throttle body to manifold.
4. Lift throttle body.
5. Remove old gasket and clean both throttle body and manifold surfaces.
6. Install power plate with (2) gaskets. (Ref. “A”)
A. Install one gasket between the throttle body and power plate.
B. Install second gasket between the power plate and intake manifold.
7. Install (4) bolts and lock washers (Ref. “B”) using Step 3 as an example.
8. Inspect & Test throttle linkage for full Open & Closed travel before driving. Some cruise or kickdown cables
may require adjustment. Please refer to your vehicles service manual for proper adjusting.
9. Reinstall air cleaner using Step 2 as an example.
10. Reconnect battery cable. Enjoy!
The sound of power...The “whistle” means its working!
Ref. “B”- (4) 5/16-18” x 3 1/4” Bolts
(4) 5/16” Lock Washers
Ref. “A”- (1) Power Plate
(2) Gaskets
Airaid Filter Co. 2688 E Rose Garden Ln. Phoenix AZ 85050 (800) 498-6951 [email protected] www.airaid.com
Rev. 11/08/06