Airaid 250-634 User Manual
Page 2
Instructions Revi-
sion11.18.14
Contact your nearest Airaid dealer for an Airaid
Intake System for your car, truck or SUV.
The sound of power...The “whistle” means its working!
5. Install the provided bolts and washers thru the throttlebody,
gasket, and Poweraid Spacer and tighten to the manufacturer's
specifications.
6. Reinstall the intake tube, tighten the two hose clamps, and
reconnect the crankcase breather tube. Reinstall the beauty
cover, and oil cap in the reverse order that they were removed.
Re-connect the negative battery cable!
Gasket
Spacer
3. Remove the four bolts that secure the throttlebody to the in-
take manifold.
4. Install the Poweraid Spacer between the throttlebody and the
intake manifold with the supplied gasket next to the throttlebody
as shown. Make sure the “flow” arrow that is printed on the
spacer is pointing towards the intake manifold.
- 883-283 (7 pages)
- 200-585-1 (2 pages)
- 200-583 (2 pages)
- 300-561 (2 pages)
- 400-531 (2 pages)
- 200-512-1 (2 pages)
- 200-555 (2 pages)
- 200-543 (2 pages)
- 200-557 (2 pages)
- 200-580 (2 pages)
- 200-584 (2 pages)
- 200-586 (2 pages)
- 200-589 (2 pages)
- 200-617 (2 pages)
- 200-612-P (2 pages)
- 200-615 (2 pages)
- 200-630-1 (2 pages)
- 300-560 (2 pages)
- 300-562 (2 pages)
- 300-564-P (2 pages)
- 300-563 (2 pages)
- 300-565 (2 pages)
- 300-567 (2 pages)
- 300-568 (2 pages)
- 300-570 (2 pages)
- 300-573 (2 pages)
- 300-574 (2 pages)
- 300-575 (2 pages)
- 300-577 (2 pages)
- 300-626 (2 pages)
- 300-631-1 (2 pages)
- 310-506 (2 pages)
- 300-637 (2 pages)
- 310-508 (2 pages)
- 310-509 (2 pages)
- 310-510 (2 pages)
- 310-515 (2 pages)
- 310-511 (2 pages)
- 310-616 (2 pages)
- 310-618 (2 pages)
- 350-532 (2 pages)
- 350-635 (2 pages)
- 400-516 (2 pages)
- 400-507 (2 pages)