Airaid 100-701 - Manual (Page 2)

2
Installation Instructions. Read Me!
1. DISCONNECT NEGATIVE (-) BATTERY CABLE.
2. Remove air cleaner.
3. Remove (4) bolts.
4. Remove carburetor.
5. Remove gasket and clean surfaces.
6. Install power plate with (2) gaskets.
A. (1) between carburetor and power plate.
B. (1) between power plate and manifold.
7. Install (4) 5/16-18” x 2 1/4” bolts and (4) 5/16” flat washers, using Step #2 as an example.
8. Inspect & Test throttle linkage for full Open & Closed travel before driving. Some cruise or kickdown cables
may require adjustment. Please refer to your vehicles service manual for proper adjusting.
9. Reinstall the air cleaner.
10. Reconnect battery cable. Enjoy!
The sound of power...The “whistle” means its working!
AIRAID Filter Co. 2688 E Rose Garden Ln. Phoenix AZ 85050 (800) 498-6951 [email protected] www.airaid.com
Rev. 02-05-07