AEC VacTrac Series Conveying Systems - Manual (Page 17)

Material characteristics determine the type of equipment needed to properly convey the
material.
See Figures 26 and 30 on pages 52 and 55 for typical system configurations.
2-3 Standard Features & Options
SRI Series Inventory Vacuum Receivers
Models: SRI01, SRI02, SRI04
• Brushed stainless steel construction, with stainless steel product
contact surfaces.
• Pyrex™ sight glass.
• Receiver capacities of 0.1, 0.2, and 0.4 cu. ft. (2.8, 5.6, and 11.3 liters).
• Ten (10) -mesh stainless steel pellet deflector screen.
• Designed for minimum inventory on molding machine.
• Four-inch (101.6 mm) -sq. flange on 0.1 cu. ft. (2.8 liter) model.
• Seven-inch (177.8 mm) -sq. flange on 0.2 and 0.4 cu. ft. (5.6 and 11.3
liter) models.
• Side inlet/outlet design.
• Removable inlets and outlets, up to 2” O.D. on 0.2 and 0.4 cu. ft (5.6
and 11.3 liter) models; material inlet is check valve-ready.
• Check valve for single-line Y applications.
• Adjustable proximity-type material level sensor (mounted on sight
glass): 24 VDC or 115 VAC.
Conveying System Mechanical Components Chapter 2: Functional Description 16 of 136