AEC VacTrac Series Conveying Systems - Manual (Page 105)

Problem Possible Cause Possible Remedy
Filters in the filter chamber
are dislodged, worn, or not
seated properly on the
gasket.
Replace or repair
immediately.
If the exhaust silencer has
material in it, replace it to
prevent fire hazard.
Material is sucked from the
filter chamber and through
the blower.
The material conveyed is not
what the system was
designed to convey. Very
dusty materials have
different conveying needs.
Consult manufacturer for
advice on hardware
requirements.
Other service problems or questions can be answered by contacting the Service Department.
Conveying System Mechanical Components Chapter 6: Troubleshooting 104 of 136