ACTi ENR-1000 - Manual (Page 95)

www.acti.com
ENR-
1000 Series System Administrator’s Manual
95
Set Date & Time
Go to Setup page  System tab  Date and Time
You may configure other time-related settings here.
Change Time Zone
Select the time zone where ENR server belongs to. After selecting the time zone, it will
change to the corresponding date and time.
Change Date and Time
It shows the current date and time on the device. Click
to bring up the calendar. Input the exact date and time, then click
“ OK ”.
Set Daylight Saving
If the device is located in an area where daylight saving time is used, click the check box to
enable daylight saving. The time will be automatically adjusted. When the daylight saving
time has finished, uncheck the box to return to original setting.
Set NTP Server
Please enter a NTP server address and click “ Apply ” to synchronize time with the NTP server.
Make sure ENR has connection with the NTP Server.
To delete this NTP server, simply clear its address in this field and click “ Apply ”.
Note
If your NTP server is a domain name address, make sure you have configured the DNS
Setting and chosen appropriate Default Gateway on Setup page  System tab  Network