ACTi ENR-1000 - Manual (Page 23)

www.acti.com
ENR-
1000 Series System Administrator’s Manual
23
Lock Disk
SATA-2 using
disk screws in
this sequence:
A  B  C  D
Step 3 Install Disk SATA-1
Repeat Step1~Step3 to install Disk SATA-1 to the
upper bay. Remember to connect Disk SATA-1 with
SATA data cable 1 shown in the illustration in Step 2 .
Step 4 Install the Case Cover Back
Install the case in
reverse order of removal
step (see Step 2 ), slide
the case cover back until
it clicks. Lock the back
panel and then front
panel with its screws.
Disk SATA-1
Disk SATA-2