Connect the devices – ACTi ENR-1000 User Manual
Page 26
ENR-
1000 Series System Administrator’s Manual
Connect the Devices
Follow the procedures to connect the devices. These devices are supposed to be connected
in the sequence shown below.
1.
Connect the HDMI monitor.
2.
Connect the USB devices.
3.
Attach the network cable to
LAN1
port.
4.
Attach the network cable to
LAN2
port. (Optional, required for remote client
connection)
5.
Plug the power adapter into ENR and electricity outlet.
6.
Press down
Power Button
to start the device, the power status LED will turn solid
blue.
7.
Connect the network cameras to the switch and power them on.
5
1
3
7
6
4
USB Devices
2
This manual is related to the following products: