ACTi ENR-1000 - Manual (Page 20)

www.acti.com
ENR-
1000 Series System Administrator’s Manual
20
Installation
The installation procedures may vary depending on your site conditions. The procedures
provided in this manual are based on an example consisting of (1) local network, (2) an ENR
unit, (3) ACTi network cameras, (4) a POE network switch and (5) necessary peripherals.
Prepare the Devices
Before starting connecting all the devices together, please read the instructions below to
make sure your devices are ready for ENR system installation.
Cameras
ENR is able to automatically add the connected devices and immediately displays their live
streams without your further configurations. Please fulfill the conditions below to make sure
your devices are ready for ENR Auto Add function:
1. For a device whose settings have been changed from factory default, make sure
its output stream is H.264 encoder type , (If this device outputs multiple streams at the
same time such as a video server or a camera in 4VGA or 6VGA more, ENR will add
All streams add Stream 1 ; if this device is in dual-streaming mode, ENR will add
Stream 1 only)
2. The device’s connection type is Dynamic mode (DHCP Client). You can configure the
device’s connection settings via Web Configurator .
If your device is an other brand’s product or you would like to add more streams from a
device, use Search Cameras provided by Camera Setup Wizard .
(ACTi camera web configurator interface)