Configure ptz preset points, Enr- 1000 series system administrator’s manual – ACTi ENR-1000 User Manual
Page 115
ENR-
1000 Series System Administrator’s Manual
Configure PTZ Preset Points
With PTZ devices, you may define a view by where to look (through panning and tilting) and
how close (through zooming) to zoom. Once these views have been saved in ENR as preset
points, the device can always point to this view upon the event triggering or user
’s command.
Go to
Setup
page
Camera
tab, select a PTZ camera from
All Cameras
list, and click .
Check the “
Enable PTZ
” box to start setting the preset points.
1.
On mini live window, use the mouse to do the following PTZ operations:
To execute optical
Panning
and
Tilting
, click anywhere on the live window to allow
the camera to move in that direction. The length of the direction indicator is proportional
to the Pan and Tilt speed. The farther you place the cursor from the center, the faster the
Pan/Tilt movement.
To execute optical
Zoom in
or
Zoom out
, scroll the mouse wheel forward to zoom in;
scroll the mouse wheel backward to zoom out.
By default, ENR will communicate ACTi devices with the default settings, in which
case you will not need to configure any property
. For certain PTZ solutions, such as
a hemispheric camera in 6VGA mode or an analog PTZ device attached to an ACTi video
server, you will need to enable the PTZ properties on ENR interface.
Brand
PTZ Device Types
Requires enabling of PTZ
on ENR interface
ACTi
IP Speed Dome
IP Zoom Camera / IP PTZ Camera
Hemispheric / Fisheye Dome
V
IP Camera mounted on Scanner/ Analog
PTZ camera attached to Video Server
V
Others
All devices with PTZ functions
V