ACTi ENR-1000 - Manual (Page 64)

www.acti.com
ENR-
1000 Series System Administrator’s Manual
64
Schedule Recordings
Unlike the traditional analog surveillance system, the IP surveillance system provides a
target-oriented recording schedule for devices; the view of each device can be recorded
based on your required time segments and event types. For example, you may have a
camera installed on the office ceiling do continuous recording during work hours, and record
only upon the triggers (incidents that detected by system) at night. In this way, the system
does not waste disk space storing meaningless parts, and you save lots of effort browsing
playback for specific events.
For the recording schedule, ENR supports Schedule recording , Event recording and
Event Speed-up Recording modes, which are set up on a week-based timetable; the
event-handling schedule is configured here.
On ENR, you can configure camera ’s recording schedule on 7 days / 24 hours basis. The
schedule is split into segments of one-hour-length. By default, once a device is added to the
system, its schedule is automatically set to full-time schedule recording and event handling.
You should configure it according to your system plan.
On Live screen  Select Setup  click “ Schedule ” tab and select one channel.